Device Setup
1. Connect the power cord to the external power supply. Plug the circular connector into the back of the unit. Plug the power cord into the wall outlet.
1. Turn on the power switch on the back of the device. The touch screen will illuminate. Review the checklist on the touch screen. Confirm and press “NEXT”.
4. Choose “MANUAL” for one treatment cycle or “PRESET PROGRAM” for multiple sessions. Select duration up to 40 minutes on MANUAL. Press “NEXT”
2. Connect the hose to the control unit. You will hear a click when properly connected.
User Interface
2. Select desired COLD LEVEL and press “NEXT”. Level 5 is coldest! Cold settings levels as follows:
1: 58F | 2: 54F | 3: 50F | 4: 46F | 5: 42F
5. Review and confirm your settings by pressing “START” or press “BACK” to change the settings.
3. Secure the wrap on the appropriate body part. Connect the hose to the wrap. You will hear a click when properly connected.
3. Select desired COMPRESSION LEVEL and TYPE. Press “NEXT”.
4. During treatment sessions, settings can be adjusted by pressing 1-5 or LOW, MED, HIGH. To cycle through different backlight levels, press “DIM”.